Force10 Networks Force10 Manual de usuario descargar pdf (Pagina 31)

Installing and Maintaining the E1200i System 31

Access the fan tray slots from the rear of the chassis (Figure 9). Two fan trays are required in the chassis.

When a fan tray is not installed in the lower slot, a self-closing door will seal the slot. Panel blanks are not

required. However, to ensure fail-safe chassis operation, do not operate the chassis with only one fan tray

for more than 30 minutes.

Chapter 6 Installing Fan Trays

Warning: Install the fan trays before you supply power to the system.

Warning: Electrostatic discharge (ESD) damage can occur when components are mishandled.

Always wear an ESD-preventative wrist or foot-heal ground strap when handling chassis

components. After you remove the original packaging, place chassis components on an antistatic

surface.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 104 105

Sin comentarios

Force10 Networks Force10 Manual de usuario Pagina 31