Force10 Networks Force10 Manual de usuario Pagina 81
- Pagina / 105
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Installing and Maintaining the E1200i System 81
2. Execute the following show commands to display important boot information:
show boot selector
This command displays the boot ROM image currently selected and the most recently booted ROM image.
3.
show bootflash
This command displays information about the current boot ROM.
Step Command Task (continued)
BOOT_USER # show boot selector
ROM BOOTSTRAP SELECTOR PARMETERS:
================================
Current ROM bootstrap selector set to Bootflash partition A.
Last ROM bootstrap occurred from Bootflash partition A.
BOOT_USER #
BOOT_USER # show bootflash
GENERAL BOOTFLASH INFO
======================
Bootflash Partition A:
Force10 Networks System Boot
Copyright 1999-2007 Force10 Networks, Inc.
ROM Header Version 1.0
Official CP_IMG_BOOT, BSP Release 2.0.0.14
Created Fri Nov 2 18:22:47 US/Pacific 2007
Bootflash Partition B:
Force10 Networks System Boot
Copyright 1999-2007 Force10 Networks, Inc.
ROM Header Version 1.0
Official CP_IMG_BOOT, BSP Release 2.0.0.14
Created Fri Nov 2 18:22:47 US/Pacific 2007
Boot Selector Partition:
Force10 Networks System Boot
Copyright 1999-2007 Force10 Networks, Inc.
ROM Header Version 1.0
Official CP_IMG_BOOT_SELECTOR, BSP Release 2.0.0.14
Created Fri Nov 2 18:26:56 US/Pacific 2007
BOOT_USER #
- Installing and Maintaining 1
- Trademarks 2
- Statement of Conditions 2
- Specifications” on page 91 2
- Contents 3
- Appendix E 6
- List of Figures 7
- List of Tables 9
- Chapter 1 About This Guide 11
- Related Publications 12
- Chapter 2 The E1200i System 13
- 18 The E1200i System 18
- Chapter 3 Site Preparation 19
- Rack Mounting 20
- Cabinet Placement 20
- Fans and Airflow 21
- Storing Components 22
- FN00058A 24
- FN00046B 25
- 26 Installing the AC Chassis 26
- 30 Installing the DC Chassis 30
- 32 Installing Fan Trays 32
- To install fan trays: 33
- 34 Installing Fan Trays 34
- Securing the Chassis Ground 36
- Installing Power Supplies 36
- Operational Lit: GREEN 39
- Loss of Power Unlit 39
- Table 5 Fan Tray LEDs 39
- Status LED is 39
- Figure 15 E1200i DC PEM 41
- Installing DC PEMs 42
- FN00103lp 43
- Retaining 43
- PEM interlock lever 44
- Locking screws 44
- Over current protector 44
- Step Task (continued) 45
- Unpacking an RPM or Line Card 49
- Line Cards 50
- Blank Panels 51
- FN00036CH 52
- Load first 52
- FN00029B 52
- RPM Label and LEDs 53
- to the left-most slot (0) 54
- Table 6 RPM LEDs 54
- SFM Front Panel and LEDs 55
- RPM Ports 57
- 87654321 58
- 60 RPM Ports and Cables 60
- Chapter 11 Powering Up 61
- Supplying Power - AC 62
- Supplying Power - DC 62
- Booting to the CLI Prompt 63
- 64 Powering Up 64
- Components 65
- Standby switch is in Standby 67
- Remove a DC Power Supply 70
- Removing and Replacing SFMs 72
- FN00055A 73
- FN00054A 76
- Appendix B System Boot 79
- Step Command Task 80
- show boot selector 81
- show bootflash 81
- 86 System Boot 86
- Appendix C Alarms 87
- Power Supplies and Alarms 88
- SFMs and Alarms 89
- 90 Alarms 90
- • Agency Compliance 91
- 92 System Specifications 92
- Environmental Specifications 94
- Agency Compliance 94
- • CUS UL 60950-1, 1st Edition 95
- • CSA 60950-1-03, 1st Edition 95
- • EN 60950-1, 1st Edition 95
- Electromagnetic Emissions 96
- Immunity 96
- 98 System Specifications 98
- Appendix E Technical Support 99
- Accessing iSupport Services 100
- Step Task 102
- 104 Index 104
- Warning 12 105
- WEEE 97 105
Relacionado con productos y manuales para Redes Force10 Networks Force10
(132 paginas)Cooper Bussmann Networking manuali utente
La lista di Cooper Bussmann Networking prodotti contiene 9 manuali utenti per 5 modelli. Tutte le guide utenti pdf sono disponibili per essere scaricate o visionate online.
Comentarios a estos manuales